Type: Driver
File Name:
File Size: 35.3 MB
30 (3.17)
Downloads: 25
Supported systems: Windows Vista, Windows Vista 64-bit, Windows XP 64-bit, Mac OS X, Mac OS X 10.4, Mac OS X 10.5
Price: Free* (*Free Registration Required)

Download Now

You must have JavaScript enabled in your browser to utilize the functionality of this website. Industrial Ethernet. Go to configuration.


Price on request. Discount - Total: Edit Cart.

OnCell G/G Series - Cellular Gateways Moxa

Favorite products. Forgot your password?


Enlarge picture Enlarge picture Enlarge picture. Download datasheet.

OnCell G3111

OnCell Central Manager bit. OnCell Windows Driver Manager.

OnCell Search Utility. The serial port parameters will use firmware settings instead of depending on your application program AP. The firmware will only moxa oncell g3111 data back to the driver on the host.

If one of the hosts opens the COM port with different serial settings, data will not be transmitted properly. If you select Disable, the port will wait until the data has been transmitted successfully to all hosts before transmitting the next group of data. If you select Enable, the port will ignore moxa oncell g3111 host that stopped responding and continue data transmission to the moxa oncell g3111 hosts.

OnCell GHSPA Series - Cellular Gateways Moxa

If Disable is selected, driver control commands will be ignored. If Enable is selected, control commands will be accepted, with the most recent command received taking precedence. At the default of 0 for packet length, no maximum amount is specified and data in the buffer will be sent as specified by the delimiter settings or when the buffer is full. When a packet length between 1 and bytes is specified, data in the buffer moxa oncell g3111 be sent as soon it reaches the specified length.

OnCell G3111

A second delimiter character may be enabled and specified in the Delimiter 2 field, so that both characters act as the delimiter to control when data should be sent. Delimiter 2 should only be enabled in conjunction with Delimiter 1 and never on its own; otherwise there may be data errors. Delimiter 1 must be enabled for this field to have effect. If Delimiters 1 and 2 are both enabled, both characters must be received for the delimiter process to take place. When set to 0, the moxa oncell g3111 transmit time is disabled, and transmission is determined solely by the data in the internal buffer.

The optimal force transmit time depends on your application, but it must be at least larger than one character interval within the specified baudrate.

hp pavilion 752n sound cardAsk a Question
hp pavilion n5495 aim 3.0 codecOnCell G3101/G3201 Series
ricoh mpc2503Select a Product Series
82566mm ndis2SALES LINES
msi vr340 wlanQuick Overview

For example, assume that the serial port is set to bps, 8 data bits, 1 stop bit, and no parity. Therefore, you should set the force transmit time to be greater than 8.

At least one destination must be provided. To avoid conflicts with well known TCP ports, the default is set to In order moxa oncell g3111 prevent a COM port conflict with other applications, the user can set the Command port to another port if needed. Port might be blocked by a firewall.

You should make sure the port is NOT blocked before you start using it. It moxa oncell g3111 the port number that the serial port uses to listen to connections, and that other devices must use to contact the serial port.


Therefore, you should set the force transmit time to be larger than 8. The TCP connection is closed if there is no incoming or outgoing data through the serial port for the moxa oncell g3111 Inactivity time. If this field is set to 0, the TCP connection is kept active until a connection close request is received.The OnCell G/G/G/G are cellular IP gateways that can conveniently and transparently connect up to two devices to a cellular network.

The OnCell G/GHSPA Series consists of cellular IP gateways that can conveniently and transparently connect your existing Ethernet and serial.

Relevant Posts